Paper
27 January 2023 Ultrafast laser ablation of aramid fiber-reinforced polymers and its application in satellite antenna
Author Affiliations +
Proceedings Volume 12550, International Conference on Optical and Photonic Engineering (icOPEN 2022); 125500B (2023) https://doi.org/10.1117/12.2666541
Event: International Conference on Optical and Photonic Engineering (icOPEN 2022), 2022, ONLINE, China
Abstract
In this paper, ultrafast laser ablation of Aramid Fiber Reinforced Plastic (AFRP) and its application in satellite reflector antenna was studied. Intrinsic properties for transmission spectrum were measured. For material processing the influence of pulse energy fluence, pulse overlapping rate and laser wavelength (from the NIR to the NUV) on appearance qualities (namely the blackening of cutting edge) were studied. It was shown that the wavelength played an important role in controlling the machining defects such as blackening. While NUV wavelength long pulse (10 ps) laser generated a smooth cutting cross-section with material’s intrinsic colors, the NIR wavelength resulted in a carbonization-prone ablation, even if the femtosecond laser was considered. The possible mechanisms involved were discussed. The application of laser trimming of satellite antenna was demonstrated.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kaihu Zhang, Mingyu Lu, Yue Zhao, Xu Chen, Zhigang Cui, YunPeng Zhao, Yang Yu, Xueyuan Si, Xu Zhou, and Zhenxing Lv "Ultrafast laser ablation of aramid fiber-reinforced polymers and its application in satellite antenna", Proc. SPIE 12550, International Conference on Optical and Photonic Engineering (icOPEN 2022), 125500B (27 January 2023); https://doi.org/10.1117/12.2666541
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Ultrafast lasers

Antennas

Laser cutting

Satellites

Femtosecond phenomena

Picosecond phenomena

RELATED CONTENT

Trends in laser micromachining
Proceedings of SPIE (March 04 2016)
Picosecond laser ablation of polyamide electrospun nanofibers
Proceedings of SPIE (February 17 2017)
Fast micromachining using picosecond lasers
Proceedings of SPIE (March 08 2005)

Back to Top