Paper
1 August 1990 Design of optical coatings
Author Affiliations +
Proceedings Volume 1270, Optical Thin Films and Applications; (1990) https://doi.org/10.1117/12.20385
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
A highly sophisticated antireflection coating and a cut-on-filter - designed by the Leitz program "RDP" - will be pointed out. The program runs on a VAX 8530 and allows to calculate reflectance, transmittance and phase of randomly polarized light which interacts with marginal surfaces. The number of layers is not limited. Some or even all layers are allowed to be anistropic. Up to four layers may be inhomogeneous both in refractive indices and absorption constants. At a time two thicknesses, two refractive indices and absorption constants as well as the angles of incidence may be varied independently in each run. The calculated values will be compared with the results of measurements. The antireflection coating is evaporated in a Balzers high vacuum evaporation plant, controlled by the process unit BPU 420, whereas the cut-on filter is evaporated in a Leybold box coater with Leycom III and two electron-beam guns.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claus W. Gunkel "Design of optical coatings", Proc. SPIE 1270, Optical Thin Films and Applications, (1 August 1990); https://doi.org/10.1117/12.20385
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Antireflective coatings

Coating

Thin films

Oxides

Absorption

Optical coatings

RELATED CONTENT

Design and pre-production analysis of optical coatings
Proceedings of SPIE (September 23 2015)
Designing and preparation of tricolor light filter
Proceedings of SPIE (February 18 2011)
Alternated gradual synthesis
Proceedings of SPIE (September 07 1999)

Back to Top