Presentation + Paper
21 November 2023 Imaging validation for LS of dark field low-n vs. Ta-based absorber masks
Author Affiliations +
Abstract
In this work we continue to validate both by experiment and simulations the lines and spaces (LS) printing performance in terms of background printing and mask 3D effects with a dark field (DF) low-n absorber mask with 13% absorber reflectivity vs. a traditional Ta-based absorber mask. The brightness of the low-n absorber is the reason for a brighter background, what can have an impact on the remaining resist height after exposure. We experimentally verify by AFM the remaining resist height for different pitches through dose and through focus vs. the background for exposure with low-n and Ta-based absorber masks. It is also expected that such low-n absorber masks are more sensitive to mask 3D effects. Therefore, we study M3D effects on horizontal LS and 2Bars. There we evaluate Pattern Shift through focus as well as a 2Bar CD asymmetry through slit and through focus. We also measure MEEF for various LS pitches.
Conference Presentation
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Tatiana Kovalevich, Lieve Van Look, Alain Moussa, Joern-Holger Franke, and Vicky Philipsen "Imaging validation for LS of dark field low-n vs. Ta-based absorber masks ", Proc. SPIE 12750, International Conference on Extreme Ultraviolet Lithography 2023, 1275005 (21 November 2023); https://doi.org/10.1117/12.2687549
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Printing

3D mask effects

Extreme ultraviolet

Extreme ultraviolet lithography

Lithography

Metals

Optical lithography

RELATED CONTENT

Overlay challenges in the era of high-NA
Proceedings of SPIE (April 27 2023)
IMEC N7, N5 and beyond DTCO, STCO and EUV...
Proceedings of SPIE (March 20 2018)
EUV lithography at the 22nm technology node
Proceedings of SPIE (March 22 2010)

Back to Top