Presentation + Paper
11 September 2024 GMTO primary mirror active support system testing with the test cell and mass simulator
Author Affiliations +
Abstract
GMTO has developed a full-scale prototype of the cell that can house an 8.4-meter borosilicate mirror. This test cell is populated with all the active support control hardware and a mass simulator that simulates the mirror weight and the moment of inertia. GMTO has implemented the control software with all the core features needed to operate the active support system. A series of tests have been carried out to verify the functions, performance, and safety of the active support control system. The tests were carried out at several different orientations of the cell to demonstrate that the active support system works with the changing zenith angle and location of the mirror on the telescope mount. This paper describes the results of important safety and dynamic response tests of the active support system.
Conference Presentation
© (2024) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Trupti Ranka, Barbara Fischer, Christopher Contaxis, Dave Ashby, Tomas Krasuski, Dave Zeller, Gary Muller, Michael Gardiner, Jose Soto, Hector Swett, Oliver McIrwin, Austin Everman, Neil Mills, John Ford, Thomas Salanski, and Michael Mariano Kanoa Sibayan "GMTO primary mirror active support system testing with the test cell and mass simulator", Proc. SPIE 13094, Ground-based and Airborne Telescopes X, 130941E (11 September 2024); https://doi.org/10.1117/12.3020281
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Control systems

Power consumption

Safety

Telescopes

Frequency response

Motion measurement

Back to Top