Translator Disclaimer
Paper
1 September 1991 Analysis of the flying light spot experiment on SPRITE detector
Author Affiliations +
Abstract
This paper shows some results about the variation of the SPRITE's line spread function(LSF) with the detector bias current by the flying light spot experiment and analyses the relation of the parameters, which are detector modulation transfer function(MTF), minority carriers lifetime and bias current. The results obtained indicate the performances of the SPRITE detector have not been used optimum appling the bias current (I = 3 mA) at the pixel S = I .8x 106 , It is difficult to improve the efficiency of the SPRITE detector application for the high performance thermal imaging system by increasing pixel or adjusting detector geometry figure.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boqi Gu and Wen Qing Feng "Analysis of the flying light spot experiment on SPRITE detector", Proc. SPIE 1488, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing II, (1 September 1991); https://doi.org/10.1117/12.45825
PROCEEDINGS
4 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Future of MRT
Proceedings of SPIE (August 31 1993)
Infrared focal plane array modeling
Proceedings of SPIE (October 01 1990)
MTF measurement of infrared optical systems
Proceedings of SPIE (September 23 2009)
Sine wave measurements of SPRITE detector MTF
Proceedings of SPIE (September 01 1991)
Review of thermal imaging system performance
Proceedings of SPIE (September 16 1992)

Back to Top