Paper
1 November 1991 Preparation and O+ implantation of Y-Ba-Cu-O superconducting thin films by sputtering and RTA process
Xiang Jun Fan, Huai Xi Guo, Chang Zhong Jiang, You Gui Pen, Chang Liu, Zhi Lin Pen, Hong Tao Li
Author Affiliations +
Proceedings Volume 1519, International Conference on Thin Film Physics and Applications; (1991) https://doi.org/10.1117/12.47288
Event: International Conference on Thin Film Physics and Applications, 1991, Shanghai, China
Abstract
An ion beam sputtering and a magnetron sputtering technique was respectively employed to deposit Y1B2aCu3O7 thin films. After deposition, the films were annealed by three-step rapid thermal annealing (RTA) in flowing oxygen. The zero resistance temperature of the superconducting thin films were achieved above 80 K. X-ray diffraction shows that the sputtered films have a c-axis orientation perpendicular to the film surface like epitaxial film. It is found that the proportion of yttrium was higher than the composition of the thin film within 60A from the surface measured by XPS. The EPMA shows that the proportion of yttrium was considerably decreased by the annealing procedure. 120 Kev O+ has been implanted into Y-Ba-Cu-O as-deposited films. The initial values of resistance were strongly reduced with increasing Oo doses. The resistance vs. temperature curves of implanted films are characterized as a semiconductor with a negative temperature coefficient.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiang Jun Fan, Huai Xi Guo, Chang Zhong Jiang, You Gui Pen, Chang Liu, Zhi Lin Pen, and Hong Tao Li "Preparation and O+ implantation of Y-Ba-Cu-O superconducting thin films by sputtering and RTA process", Proc. SPIE 1519, International Conference on Thin Film Physics and Applications, (1 November 1991); https://doi.org/10.1117/12.47288
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sputter deposition

Thin films

Resistance

Ions

Superconductors

Annealing

Yttrium

RELATED CONTENT


Back to Top