Paper
1 June 1992 Diode-pumped regenerative Nd:YAG ring amplifier for space application
Author Affiliations +
Proceedings Volume 1627, Solid State Lasers III; (1992) https://doi.org/10.1117/12.60155
Event: OE/LASE '92, 1992, Los Angeles, CA, United States
Abstract
The study reviews the research and development of a prototype laser used to study one possible method of short-pulse production and amplification, in particular, a pulsed Nd:YAG ring laser pumped by laser diode arrays and injected seeded by a 100-ps source. The diode array pumped, regenerative amplifier consists of only five optical elements, two mirrors, one thin film polarizer, one Nd:YAG crystal, and one pockels cell. The pockels cell performed both as a Q-switch and a cavity dumper for amplified pulse ejection through the thin film polarizer. The total optical efficiency was low principally due to the low gain provided by the 2-bar pumped laser head. After comparison with a computer model, a real seed threshold of about 10 exp -15 J was achieved because only about 0.1 percent of the injected energy mode-matched with the ring.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Barry Coyle, R. B. Kay, John J. Degnan, Danny J. Krebs, and Bernard D. Seery "Diode-pumped regenerative Nd:YAG ring amplifier for space application", Proc. SPIE 1627, Solid State Lasers III, (1 June 1992); https://doi.org/10.1117/12.60155
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nd:YAG lasers

Optical amplifiers

Semiconductor lasers

Polarizers

Pulsed laser operation

Thin films

Diodes

Back to Top