Paper
14 August 1992 On-line IR analyzer system to monitor cephamycin C loading on ion-exchange resin
Sheldon Shank, Warren Russ, Douglas Gravatt, Wesley Lee, Steven M. Donahue
Author Affiliations +
Proceedings Volume 1681, Optically Based Methods for Process Analysis; (1992) https://doi.org/10.1117/12.137755
Event: SPIE's 1992 Symposium on Process Control and Monitoring, 1992, Somerset, NJ, United States
Abstract
An on-line infrared analyzer is being developed for monitoring cephamycin C loading on ion exchange resin. Accurate measurement of product loading offers productivity improvements with direct savings from product loss avoidance, minimized raw material cost, and reduced off-line laboratory testing. Ultrafiltered fermentation broth is fed onto ion exchange columns under conditions which adsorb the product, cephamycin C, to the resin while allowing impurities to pass unretained. Product loading is stopped when the on-line analyzer determines that resin capacity for adsorbing product is nearly exhausted. Infrared spectroscopy has been shown capable of quantifying cephamycin C in the process matrix at concentrations that support process control decisions. Process-to-analyzer interface challenges have been resolved, including sample conditioning requirements. Analyzer requirements have been defined. The sample conditioning station is under design.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sheldon Shank, Warren Russ, Douglas Gravatt, Wesley Lee, and Steven M. Donahue "On-line IR analyzer system to monitor cephamycin C loading on ion-exchange resin", Proc. SPIE 1681, Optically Based Methods for Process Analysis, (14 August 1992); https://doi.org/10.1117/12.137755
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Statistical analysis

Proteins

Chemical analysis

Ion exchange

Process control

Data modeling

Calibration

Back to Top