Paper
22 December 1992 Development of microstrip gas chamber and application to imaging gamma-ray detector
Toru Tanimori, S. Minami, T. Nagae, Tadayuki Takahashi, T. Miyagi
Author Affiliations +
Abstract
We have developed a microstrip gas chamber (MSGC) by using multi-chip technology which enables high-density assembly of bare LSI chips on a silicon board. Our MSGC was operated steadily with approximately 103 gain more than one week. An energy resolution of 15% (FWHM) for 5.9 keV x ray of 55Fe was obtained. With a very thin polyimide substrate of 16 micrometers thickness, two interesting phenomena were observed; one is a strong dependence of gains on the back plane potential, and the other is little time variation of gains. A new type of MSGC with a guarding mask of a thin polyimide layer on the cathode edges has been examined to reduce incidental electrical discharges between anode and cathode strips. Furthermore, a new approach to reduce the resistivity of the substrate has been examined. By these approaches, the stability of the high gain operation of approximately 104 has been drastically improved. In addition, we discuss the possibility of the application of MSGC to the coded mask x-ray imaging detector for astrophysics.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toru Tanimori, S. Minami, T. Nagae, Tadayuki Takahashi, and T. Miyagi "Development of microstrip gas chamber and application to imaging gamma-ray detector", Proc. SPIE 1734, Gamma-Ray Detectors, (22 December 1992); https://doi.org/10.1117/12.138606
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Silicon

Electrodes

Gamma radiation

Photomasks

Coating

Image sensors

RELATED CONTENT


Back to Top