Paper
4 August 1993 Application-specific microscopy for half-micron metrology
Mircea V. Dusa, Guoqing Xiao, Frank S. Menagh, Erik H. Rauch, William M. Gouin, George P. Mirth
Author Affiliations +
Abstract
A new concept, the 'Application Specific Microscopy', is proposed here for today's complex lithography patterns containing 3D halfmicron information. The concept is based on the fact that a consistent 2D metrology process is no longer sufficient to characterize samples with 3D information. The Z information becomes necessary for the correlation between metrology measurement results to the sample XYZ topography. Also a complete Z information helps both metrology and lithography engineers to trace process variations. the Z information is in fact the FOCUS parameter. It becomes the most critical parameter in the XY halfmicron metrology process, similar to optical halfmicron lithography process. The Z information is acquired when the sample is scanned in Z. A Z-scan capability with nanometer resolution was used here to acquire the necessary Z information, an information that was then used to determine metrology system Depth Response Function. The Depth Response Function was used to monitor focus and to manipulate the metrology system for optimum performance on a particular sample.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mircea V. Dusa, Guoqing Xiao, Frank S. Menagh, Erik H. Rauch, William M. Gouin, and George P. Mirth "Application-specific microscopy for half-micron metrology", Proc. SPIE 1926, Integrated Circuit Metrology, Inspection, and Process Control VII, (4 August 1993); https://doi.org/10.1117/12.149008
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metrology

Confocal microscopy

Microscopy

Lithography

3D metrology

Imaging systems

Oxides

Back to Top