Paper
25 August 1994 Design of rectangular waveguides for integrated optics with mode matching techniques
Lars Oddvar Lierstuen, Aasmund Sudbo
Author Affiliations +
Proceedings Volume 2212, Linear and Nonlinear Integrated Optics; (1994) https://doi.org/10.1117/12.185154
Event: Integrated Optoelectronics '94, 1994, Lindau, Germany
Abstract
Rectangular core waveguides for integrated optics have been designed by the mode matching (transverse resonance) method. To achieve good coupling between the waveguides and an optical fiber, the core cross section of the waveguide at the fiber/waveguide interface has been optimized with regard to minimum coupling loss. In calculating the overlap integral between the fundamental mode of the waveguide and the fiber a very accurate fiber model has been used. Calculations of the effective index and the field distribution of the fundamental fiber mode with this model have been compared with analytic results for circular step-index-fibers. The convergence behavior and accuracy of overlap integral calculations with the mode matching method has been investigated. The calculations show that losses as low as 0.16 dB can be reached for waveguides with refractive index contrasts in the whole range 0.5 to 2%.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lars Oddvar Lierstuen and Aasmund Sudbo "Design of rectangular waveguides for integrated optics with mode matching techniques", Proc. SPIE 2212, Linear and Nonlinear Integrated Optics, (25 August 1994); https://doi.org/10.1117/12.185154
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Refractive index

Optical fibers

Integrated optics

Cladding

Interfaces

Quantization

RELATED CONTENT


Back to Top