Paper
17 October 1994 Cold shield effectiveness in MWIR cameras
Yifal Jeff Shaham, M. Umbricht, Stephen F. Rudin
Author Affiliations +
Abstract
To minimize the noise of a PtSi IR camera we examined all the sources of radiation reaching the detector. In particular, we suspected that the cold shield which is supposed to be (nearly) 100% black -- was not. In long wavelength FLIRs where the scene radiation is the main source of noise this was never an issue. In MWIR cameras this could be a source of added noise. The problem was to evaluate the noise contribution of the reflected radiation from the cold shield by sensor measurements. To this end we replaced the lens by an equivalent black (painted) tube which was temperature controlled (heated) and was outside the FOV of the cold shield. The mean charge in the center of the FPA was evaluated as a function of the temperature of the tube. The analysis of the test data showed that the cold shield reflectance is one percent, a low value. As utilized in our IR camera, this commercially available cold shield was determined to be effective in keeping the noise low.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yifal Jeff Shaham, M. Umbricht, and Stephen F. Rudin "Cold shield effectiveness in MWIR cameras", Proc. SPIE 2269, Infrared Technology XX, (17 October 1994); https://doi.org/10.1117/12.188675
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Staring arrays

Sensors

Cameras

Infrared technology

Mid-IR

Electrons

RELATED CONTENT

244 x 320 Schottky focal plane array
Proceedings of SPIE (January 05 1993)
2 D* a new focal plane array figure of...
Proceedings of SPIE (January 05 1993)
Temperature Measurement Using Video Cameras
Proceedings of SPIE (November 10 1987)

Back to Top