Paper
21 September 1994 Real-time measurement of joint movement using a digital signal processor-based image processing system
John D. Moorehead, David Mark Harvey, Peter H. Dangerfield, S. C. Montgomery
Author Affiliations +
Abstract
A new low cost imaging system has been devised to detect and measure joint movement to help with the diagnosis of ligament injuries in the human knee. The system uses a domestic video camcorder to record the movement of marks on a patient's knee as it is flexed. The pictures are then fed into the imaging system, where the coordinates of each mark are determined for each angle of flexion. The coordinate data is then processed to show the dynamic operation of the knee, from which an assessment of ligament damage can be made. The imaging system is comprised of a PC host, a commercial frame store, and a custom built TMS320C40 digital signal processor (dsp) board. The dsp is used to perform correlation and other imaging functions, to automatically determine the mark coordinates in real time. This paper describes the application and development of the system, and gives the results of the research to date.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John D. Moorehead, David Mark Harvey, Peter H. Dangerfield, and S. C. Montgomery "Real-time measurement of joint movement using a digital signal processor-based image processing system", Proc. SPIE 2298, Applications of Digital Image Processing XVII, (21 September 1994); https://doi.org/10.1117/12.186579
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Signal processing

Image processing

Imaging systems

Data processing

Data communications

Frame grabbers

RELATED CONTENT

Auto-focus apparatus with digital signal processor
Proceedings of SPIE (January 20 2005)
Image processing using reconfigurable FPGAs
Proceedings of SPIE (October 21 1996)
Target track system design based on circular projection
Proceedings of SPIE (January 20 2006)
MultiPADDI-2 board for image processing
Proceedings of SPIE (September 19 1997)
Parallel DSP with memory and I/O processors
Proceedings of SPIE (September 21 1998)

Back to Top