Translator Disclaimer
12 May 1995 Fabrication of refractive microlens arrays
Author Affiliations +
Fabrication issues of microlens arrays, made by first forming photoresist microlenses, by patterning and reflowing photoresist islands under temperature, and then transferring this into the substrate by a dry etch process, were studied. Photoresist microlenses were reliably fabricated within a range of aspect ratios. The desired sag of the microlenses in the substrate was controllably achieved by adjusting the etch selectivity. Etching behavior of fused silica in mixtures of fluoroform with oxygen or sulfur hexafluoride was studied in detail. High quality microlens arrays were fabricated in fused silica, silicon and germanium, and selected lenses were characterized.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haluk O. Sankur, M. Edward Motamedi, Randolph L. Hall, William J. Gunning III, and Mohsen Khoshnevisan "Fabrication of refractive microlens arrays", Proc. SPIE 2383, Micro-Optics/Micromechanics and Laser Scanning and Shaping, (12 May 1995);


Novel method of fabrication of diffractive mocrolens arrays
Proceedings of SPIE (January 17 2003)
Fabrication and measurement of fused silica microlens arrays
Proceedings of SPIE (January 13 1993)
Silicon microlenses for IR image sensors
Proceedings of SPIE (August 31 1998)

Back to Top