Paper
24 December 1980 Track Assembly And Background Suppression Using An Array Processor And Neighborhood Coding
Oscar Firschein, Herbert E. Rauch, Walter G. Eppler
Author Affiliations +
Abstract
A novel method for real time track assembly is presented which identifies new tracks, assigns measurements to existing tracks, and eliminates false tracks. The method utilizes a sequence of two-dimensional frames of binary data from an infrared sensor where binary 1 in a picture element indicates target or noise above threshold and binary 0 is below threshold. Successive sets of two-dimensional frames are combined and then screened using a three-by-three pixel window. The track assembly is based upon neighborhood coding and "track scoring" which uses the binary configuration in the three-by-three window to distinguish between target tracks and noise. The method makes use of successive levels of data processing, and in a cluttered environment (noise in 3% of the pixels) it may be necessary to use three or more levels to eliminate false tracks due to noise. A special coding technique is developed for the Floating Point System AP-120B off-the-shelf array processor to allow processing of 160,000 pixels per second independent of the number of targets. This paper explains the coding scheme and the array processor mechanization.
© (1980) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Oscar Firschein, Herbert E. Rauch, and Walter G. Eppler "Track Assembly And Background Suppression Using An Array Processor And Neighborhood Coding", Proc. SPIE 0241, Real-Time Signal Processing III, (24 December 1980); https://doi.org/10.1117/12.959253
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Binary data

Array processing

Image processing

Signal processing

Infrared sensors

Computing systems

Sensors

RELATED CONTENT

Digital optical cellular computers
Proceedings of SPIE (January 16 1990)
Objectives and results of the BIRD mission
Proceedings of SPIE (November 10 2003)
Designing An Infrared System To Map And Detect Wildland Fires
Proceedings of SPIE (September 14 1989)
Parallel Array Processor Results Displayed In Near Real Time
Proceedings of SPIE (September 16 1987)

Back to Top