Paper
15 September 1995 Athermalized color correction in glass-liquid optical systems
Alexander P. Abramov, Maria V. Petrova, Michael N. Tolstoy, Paul N. Robb, Robert D. Sigler
Author Affiliations +
Abstract
The incorporation of abnormal dispersion liquids into an optical design can result in significant performance advantages. However, the large thermal coefficient of refractive index which is common to all liquids (dn/dT) can complicate the athermalization of these designs. One method is to use two different liquids to form both positive and negative liquid lens elements which balance each other thermally while maintaining color correction. The success of this approach is dependent on the proper selection of materials, and on a detailed knowledge of the wavelength dependence of the refractive index thermal coefficients. The thermal dependence of refractive index and dispersion in the visible spectral region for a number of liquids was investigated. A correlation between the refractive index thermal coefficient (dn/dT) and abnormal dispersion was found to exist in a majority of liquids. The optical property measurements were made at the Vavilov State Optical Institute, St. Petersburg, Russia in collaboration with the Lockheed Palo Alto Research Laboratory, Palo Alto, California.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander P. Abramov, Maria V. Petrova, Michael N. Tolstoy, Paul N. Robb, and Robert D. Sigler "Athermalized color correction in glass-liquid optical systems", Proc. SPIE 2540, Current Developments in Optical Design and Engineering V, (15 September 1995); https://doi.org/10.1117/12.219506
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Refractive index

Visible radiation

Absorption

Lens design

Optical design

Ultraviolet radiation

Back to Top