Paper
1 December 1995 Determination of the fatigue limit of an austempered ductile iron using thermal infrared imagry
Alberto L. Geraci, Guido La Rosa, Antonino Risitano, Maurice Grech
Author Affiliations +
Proceedings Volume 2646, Digital Photogrammetry and Remote Sensing '95; (1995) https://doi.org/10.1117/12.227882
Event: Digital Photogrammetry and Remote Sensing '95, 1995, St. Petersburg, Russian Federation
Abstract
Previous work by the authors showed that the endurance limit of specimens, or mechanical components, can be predicted using thermal infrared imagery. The new technique enables the determination of the fatigue strength limit in a comparatively short period of time (few thousands cycles), and using very few specimens (theoretically only 1). The present work applies this technique to rotating-bending test specimens of austempered ductile iron, an alloy whose fatigue limit is, due to the high scatter dispersion of the data points and the long testing period required, generally difficult to determine by the traditional technique. This material exhibited higher fatigue strength than the familiar nodular cast iron. This was confirmed by the results derived from the traditional Wohler test and the new technique, and supported by the data gathered from literature.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alberto L. Geraci, Guido La Rosa, Antonino Risitano, and Maurice Grech "Determination of the fatigue limit of an austempered ductile iron using thermal infrared imagry", Proc. SPIE 2646, Digital Photogrammetry and Remote Sensing '95, (1 December 1995); https://doi.org/10.1117/12.227882
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared radiation

Iron

Infrared imaging

Silicon

Thermography

Information operations

Scanning probe lithography

RELATED CONTENT


Back to Top