Paper
27 May 1996 Laser damage thresholds in fused silica structured light gratings
Alan M. Frank, Calvin H. Gillespie
Author Affiliations +
Abstract
Computer-generated, ion-milled, holographic structures and gratings are being used for multiple splitting of high-power pulsed laser beams. The structures were manufactured by Teledyne Brown Engineering in Huntsville Alabama and both a linear grating and a 2D structure were tested. Damage thresholds were measured in single-shot exposure using a 300 mj, 1 micrometers wavelength laser with a nominal 15 ns gaussian pulse. Energy densities on the gratings were adjusted with a focusing lens and the energy distribution was mapped with an imaging profiler. The gratings were examined dynamically for sparking and breakdown. They were examined after exposure using phase contrast microscopy. Initial results indicate the grating surface is always damaged before the smooth surface independent of the beam direction. The initial indication is that the average energy density threshold for single-shot damage is in the excess of 12 j/cm2.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alan M. Frank and Calvin H. Gillespie "Laser damage thresholds in fused silica structured light gratings", Proc. SPIE 2714, 27th Annual Boulder Damage Symposium: Laser-Induced Damage in Optical Materials: 1995, (27 May 1996); https://doi.org/10.1117/12.240388
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser damage threshold

Structured light

Microscopes

Optical filtering

Silica

Calibration

Manufacturing

RELATED CONTENT

Large transmission 1w and 3w gratings for the LIL laser
Proceedings of SPIE (December 26 2001)
Tool 3D geometry measurement system
Proceedings of SPIE (October 03 2001)

Back to Top