Photothermal study of optical components at 10.6 um: finite element calculations and experiments

Rene Krupka; Adolf Giesen

doi:10.1117/12.240371

27 May 1996 Photothermal study of optical components at 10.6 μm: finite element calculations and experiments

Rene Krupka, Adolf Giesen

Author Affiliations +

Proceedings Volume 2714, 27th Annual Boulder Damage Symposium: Laser-Induced Damage in Optical Materials: 1995; (1996) https://doi.org/10.1117/12.240371
Event: Laser-Induced Damage in Optical Materials: 1995, 1995, Boulder, CO, United States

Abstract

Up to now theoretical calculations of the photothermal response of optical components have only been performed using analytical approximations of the adequate thermo-mechanical equations. In contrast, this paper presents finite-element (FE) calculations for the description of the photothermal behavior of optical components at 10.6 micrometers . The FE-analysis allows the calculation of the surface temperature- and deformation-profile for bare substrates and two additional coating layers with respect to their thermo-optical properties. Also the behavior of the interfaces (substrate-coating, coating layer1 - coating layer2) can be calculated. These FE- model calculations of the photothermal response were performed with respect to the thermal properties and absorption characteristics of the coating and substrate respectively. The results are compared to experimental results obtained using the photothermal deflection technique (PDT). Additionally, the FE-model used allows the calculation of the time resolved response of the optical component to pulsed irradiation. The calculations of the temporal behavior are studied for a pulsed PDT situation and are compared to measurements. The results can also be used to determine the heat conductivity of the coatings of optical components. Some measurements and comparisons with the calculations are shown and discussed in detail.

Citation Download Citation

Rene Krupka and Adolf Giesen "Photothermal study of optical components at 10.6 μm: finite element calculations and experiments", Proc. SPIE 2714, 27th Annual Boulder Damage Symposium: Laser-Induced Damage in Optical Materials: 1995, (27 May 1996); https://doi.org/10.1117/12.240371

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE