Performance capabilities and utilization of MICOM's diode-laser-based infrared scene projector technology

D. Brett Beasley; John B. Cooper

doi:10.1117/12.241133

Translator Disclaimer

24 May 1996 Performance capabilities and utilization of MICOM's diode-laser-based infrared scene projector technology

D. Brett Beasley, John B. Cooper

Author Affiliations +

Proceedings Volume 2741, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing; (1996) https://doi.org/10.1117/12.241133
Event: Aerospace/Defense Sensing and Controls, 1996, Orlando, FL, United States

Abstract

This paper describes the current design characteristics and performance capabilities of the US Army Missile Command's diode laser based infrared scene projector technology. The projector is now operational at the US Army Missile Command's Research, Development, and Engineering Center and is being integrated into several HWIL simulation facilities. The projector is based upon a linear array of Pb-salt diode lasers coupled with a high-speed optical scanning system, drive electronics and synchronization electronics. The projector design has been upgraded to generate 256 X 256 resolution scenes at 4 KHz frame rates, and the fabrication of a 544 X 544 projector is in progress. The projector system now includes real-time non-uniformity correction electronics and is interfaced with a real-time scene generation computer. In addition, a closed-cycle cryogenic cooling system has been added for increased dynamic range and maintenance-free operation. The system's modularity provides upgradability to meet specific performance requirements such as increased spatial resolution, different emission wavelengths, or dual-band scene projections. The projector's upgraded design and performance characteristics are presented in this paper, as well as sample images generated with the projector and captured by an InSb FPA sensor.

Citation Download Citation

D. Brett Beasley and John B. Cooper "Performance capabilities and utilization of MICOM's diode-laser-based infrared scene projector technology", Proc. SPIE 2741, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing, (24 May 1996); https://doi.org/10.1117/12.241133

ACCESS THE FULL ARTICLE