Paper
24 July 1996 Defect printability analysis in electron-beam cell projection lithography
Katsuyuki Itoh, Hiroshi Yamashita, Takahiro Ema, Hiroshi Nozue
Author Affiliations +
Abstract
In electron-beam (EB) cell projection lithography, the defect in resist pattern caused from the defect on aperture mask (EB mask) must be diminished. We have experimentally evaluated the printability of the defect and confirmed EB mask inspection standard. Line-and-space (L&S) patterns of 0.20 μm width (on the wafer substrate) have been fabricated on the EB mask, which has bridge defects with width of 0.20 μm and height of 0.04-0.20 μm in the line patterns, and exposed with changing the exposure dose. The programmed bridge defect of 0.04 μm height on the wafer (1.0 μm on the EB mask) is not printable at the optimum exposure dose. However, at 90% of the optimum exposure dose, it forms a 0.08 μm disconnection defect. The defect on the EB mask is printable especially in lower exposure dose range. The defect printability is higher than the resolution of L&S pattern. The defect larger than 10 % of line pattern width on the EB mask are not allowed in order to form high quality resist patterns.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katsuyuki Itoh, Hiroshi Yamashita, Takahiro Ema, and Hiroshi Nozue "Defect printability analysis in electron-beam cell projection lithography", Proc. SPIE 2793, Photomask and X-Ray Mask Technology III, (24 July 1996); https://doi.org/10.1117/12.245201
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Bridges

Semiconducting wafers

Projection lithography

Projection systems

Electron beam lithography

Inspection

Back to Top