Translator Disclaimer
31 October 1996 Use of x-ray CCDs in the calibration of the flight mirrors for the JET-X telescope on Spectrum-X
Author Affiliations +
The x-ray mirror calibration program for the JET-X telescope on spectrum-X has recently been carried out at the 130 m long Panter x-ray beam line of the Max Plank Institute fur Extraterrestriche Physik. The excellent spatial resolution achieved with these mirrors, 15 arcsec half energy width (HEW) at 1.5 keV and 19 arcseconds at 8 keV, has proved to be difficult to measure precisely using previously established calibration methods (involving either slit detectors or the ROSAT PSPC imaging proportional counter). New diagnostic techniques have, therefore, been developed using a CCD imaging camera which utilized newly available x- ray CCD technology. Details of the calibration technique and the performance of the camera are provided and results are compared with those obtained from the slit and PSPC detectors.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian M. Castelli, Heinrich W. Braeuninger, Wolfgang Burkert, Sergio Campana, Giancarlo Cusumano, Mark Denby, Roland Egger, Nick Nelms, Mark R. Sims, D. J. Watson, Alan A. Wells, and D. Willingale "Use of x-ray CCDs in the calibration of the flight mirrors for the JET-X telescope on Spectrum-X", Proc. SPIE 2808, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy VII, (31 October 1996);


Status of ART-XC/SRG instrument
Proceedings of SPIE (July 24 2014)
X ray imaging performance of the flight model JET X...
Proceedings of SPIE (October 15 1997)
The Swift X-Ray Telescope
Proceedings of SPIE (February 03 2004)

Back to Top