Paper
11 November 1996 Calibration and characterization of an airborne pushbroom spectroradiometer
Phillip W. Dabney, Michael R. Tierney
Author Affiliations +
Abstract
Improved methods for calibrating and characterizing the CCD array based off-nadir tiltable advanced solid-state array spectroradiometer (ASAS) were developed and applied. Sensor characteristics such as radiometric sensitivity, polarization sensitivity, signal-to-noise-ratio, temperature sensitivity, spectral bandpass, spectral distortion, spatial distortion, and spatial resolution were measured. Radiometric sensitivity, array temperature sensitivity, and signal-to-noise were measured using a barium sulfate coated integrating hemisphere whose output calibration is traceable to NIST. Polarization sensitivity was measured for 48 of 62 spectral bands across all 512 spatial pixels. Spectral bandpass and spectral distortion were measured using a 0.5 meter doublepass monochromator. Spatial resolution (given as the modulation-transfer-function -- MTF) and distortion were measured using a combination of monochromatic collimated light to directly measure the point-spread-function (PSF) and the edge spread function (ESF) derived from actual image data. The MTF obtained using the two techniques are compared. Potential improvements to the test setups and methods are described.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Phillip W. Dabney and Michael R. Tierney "Calibration and characterization of an airborne pushbroom spectroradiometer", Proc. SPIE 2820, Earth Observing System, (11 November 1996); https://doi.org/10.1117/12.258112
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Polarization

Sensors

Signal to noise ratio

Point spread functions

Lithium

Modulation transfer functions

Back to Top