Paper
14 November 1996 Detection of a random edge and its application to interior surface measurement
Author Affiliations +
Abstract
A random edge is the center of an in-focus-strip which is formed by viewing a vertical surface through a conventional microscope. The in-focus-strip is the image of the surface which locates inside the depth of the field of the microscope. The image of the surface which locates outside of the depth of the field is blurred and contains only low frequency illumination profile. The location of this random edge has been used to make internal measurements within holes as small as 200 microns in diameter. A specialized edge detector has been designed to 'find' the center within the in-focused region. The detector first locates the in- focus-strip. It then extracts the surface background detail from the out-of-focus part of the image. This out-of-focus information is used to effectively normalize the intensity distribution over the image. The image is then smoothed to remove random noise. The location of the center of the in- focus-strip is then found from the application of a weighting function constructed from the position of individual details located within the edge region. This method has been used in measuring inside a 0.25 mm diameter hole. The hole is used to carry the coolant through a turbine blade. The accuracy of the measurement is better then +/- micrometers .
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhige Zhang and Peter John Bryanston-Cross "Detection of a random edge and its application to interior surface measurement", Proc. SPIE 2847, Applications of Digital Image Processing XIX, (14 November 1996); https://doi.org/10.1117/12.258227
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Edge detection

Sensors

Microscopes

Image processing

Distance measurement

Smoothing

Transducers

RELATED CONTENT

Edge localization in images by symmetrical wavelet transforms
Proceedings of SPIE (November 01 1993)
Obstacle detection in range image from laser radar
Proceedings of SPIE (October 06 1994)
Image processing: the nature and value of fuzzy metrology
Proceedings of SPIE (September 03 2008)
A new post processing method for low bit rate JPEG...
Proceedings of SPIE (June 24 2005)
A multiresolutional algorithm for halftone detection
Proceedings of SPIE (March 14 2005)
A new collimation-checking system based on Newton's ring
Proceedings of SPIE (October 13 2006)

Back to Top