Translator Disclaimer
27 December 1996 Application of direct-write electron-beam lithography for deep-submicron fabrication
Author Affiliations +
Lithography is one of the most important techniques in the IC fabrication and has been extensively used in processing. The high resolution and accuracy of electron beam lithography is most appropriate for making mask of optical and X-ray lithography as well as direct writing on wafer. Two types of resist, ZEP-520 positive resist and SAL-601 negative resist, were prepared for used in the electron beam lithography. Three different patterns, which include isolated line, contact hole and line and space patterns were exposed on the tungsten, oxide, and metal substrates, respectively. The 0.15 micrometers resolution of lithography patterns was achieved. For the etching of polysilicon and oxide, well defined profile of polysilicon gate with 0.1 micrometers width and well-defined tapered profiles of oxide contact hole have been obtained successfully.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shyi-Long Shy, Jen Yu Yew, Kazumitsu Nakamura, and Chun-Yen Chang "Application of direct-write electron-beam lithography for deep-submicron fabrication", Proc. SPIE 2884, 16th Annual BACUS Symposium on Photomask Technology and Management, (27 December 1996);

Back to Top