Paper
15 November 1996 Real-time inspection of polymer composites during consolidation
Elizabeth J. Linstrom, Susan C. Mantell
Author Affiliations +
Abstract
The goal of this work was to design and implement a noncontact, nondestructive method for evaluating interlaminar bonding during in-situ consolidation of composites. A sensor which detects poorly bonding areas in the topmost ply was developed. This sensor consists of two piezoelectric transducers mounted in a 'pitch-catch' arrangement. Plate waves and Rayleigh surface waves were generated by orienting the pitch transducer at an angle. Received signals were analyzed for frequency shift, frequency filtering, attenuation and wave speed to develop a criteria for determining poorly bonded areas. Poorly bonded specimens were manufactured and evaluated by the proposed non destructive test method. After undergoing nondestructive evaluation, the specimens were mechanically loaded to failure and the bond strength recorded. Nondestructive test predictions of bond strength will be compared with mechanical tests of bonding. Data will be presented which demonstrate the poor bond identification criteria.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Elizabeth J. Linstrom and Susan C. Mantell "Real-time inspection of polymer composites during consolidation", Proc. SPIE 2948, Nondestructive Evaluation for Process Control in Manufacturing, (15 November 1996); https://doi.org/10.1117/12.259185
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Wave plates

Transducers

Aluminum

Signal attenuation

Sensors

Nondestructive evaluation

Back to Top