Translator Disclaimer
22 January 1997 Microwave structures for traveling-wave MQW electroabsorption modulators for wideband 1.3-μm photonic links
Author Affiliations +
To implmenet millimeter wave photonic links using high speed optical modulators, bandwidth and modulation efficiency are important considerations. In this paper we discuss design and fabrication of novel traveling-wave multiple quantum well (MQW) electro-absorption modulator structures which can be used for wide-band applications, covering dc to 40 GHz or higher frequencies, that promise to provide better bandwidth and efficiency than conventional lumped modulators. From the microwave point of view, traveling wave modulators are constant impedance transmission lines, and are not limited by the RC roll off associated with modulator capacitance. Their sensitivity can be increased by increasing device length without significantly sacrificing the bandwidth. The principal bandwidth limitation comes from microwave loss. In this work, ridge co-planar waveguide structures were designed and fabricated to achieve good impedance matching, low microwave loss, low dispersion and reasonable phase velocity matching between lightwave and microwave. Two port measurements for these waveguides were performed up to 40 GHz with a network analyzer. The results show effective microwave index in the range of 4.5 to 3.6 (which is close to the effective index of the guided light wave), characteristic impedance around 30 Omega, microwave attenuation less than 6 dB/mm at 40 GHz and low dispersion. These characteristics are all promising for wide band high efficiency traveling wave modulators.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hsin Hsing Liao, X. B. Mei, Kwok Kwong Loi, Charles W. Tu, Peter M. Asbeck, and William S. C. Chang "Microwave structures for traveling-wave MQW electroabsorption modulators for wideband 1.3-μm photonic links", Proc. SPIE 3006, Optoelectronic Integrated Circuits, (22 January 1997);

Back to Top