Dynamic range expansion method for a CMD imager

Hiroshi Shimamoto; Kohji Mitani; Yoshihiro Fujita

doi:10.1117/12.275180

25 April 1997 Dynamic range expansion method for a CMD imager

Hiroshi Shimamoto, Kohji Mitani, Yoshihiro Fujita

Proceedings Volume 3019, Solid State Sensor Arrays: Development and Applications; (1997) https://doi.org/10.1117/12.275180
Event: Electronic Imaging '97, 1997, San Jose, CA, United States

Abstract

A dynamic range expansion method for charge modulation device (CMD) imagers has been proposed and an experimental circuit was evaluated. As active pixel sensors, CMD imagers offer significant advantages in terms of non-destructive readout and high-speed operation. Furthermore, the CMD imager used in this study has built-in dual vertical shift registers which can start their scanning independently. We applied our newly developed source reset method to the imager, which enables each pixel charge to be reset by external circuits. By using these functions, we have obtained our dynamic range expansion method. THe source reset method enables each pixel of a CMD imager to be reset selectively. We use it for a regional electrical shutter. For instance, if there is an overexposed pixel, its accumulated charge is reset from outside the imager, so that the pixel charge is prevented from becoming saturated. The non-destructive readout and high-speed operation enable the CMD imager to be read multiple times without destruction of accumulated charges. For instance, if the imager is driven twice in one field period, each pixel's accumulations can be checked and reset selectively from external of the device at the first scanning, then, all the signals are obtained at the second scanning and output through a small process circuit. This dynamic range expansion method for CMD imagers needs only a simple feedback circuit but does not need complex equipment externally nor adding reset circuits on a chip. An experimental circuit with this method was successfully evaluated here.

Citation Download Citation

Hiroshi Shimamoto, Kohji Mitani, and Yoshihiro Fujita "Dynamic range expansion method for a CMD imager", Proc. SPIE 3019, Solid State Sensor Arrays: Development and Applications, (25 April 1997); https://doi.org/10.1117/12.275180

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available