Evaluation of the Defense Advanced Lithography Program (DALP) x-ray lithography aligner

Alek C. Chen; Alex L. Flamholz; Azalia A. Krasnoperova; Robert P. Rippstein; Ben R. Vampatella; George A. Gomba; Robert H. Fair; William Chu; V. Dimilia; J. P. Silverman; R. J. Amodeo; Dave A. Heald; P. C. Kochersperger; Carl Stahlhammer

doi:10.1117/12.275803

7 July 1997 Evaluation of the Defense Advanced Lithography Program (DALP) x-ray lithography aligner

Alek C. Chen, Alex L. Flamholz, Azalia A. Krasnoperova, Robert P. Rippstein, Ben R. Vampatella, George A. Gomba, Robert H. Fair, William Chu, V. Dimilia, J. P. Silverman, R. J. Amodeo, Dave A. Heald, P. C. Kochersperger, Carl Stahlhammer

Author Affiliations +

Proceedings Volume 3048, Emerging Lithographic Technologies; (1997) https://doi.org/10.1117/12.275803
Event: Microlithography '97, 1997, Santa Clara, CA, United States

Abstract

A state-of-the-art proximity x-ray lithography aligner was developed for the Defense Advanced Lithography Program (DALP) and installed in IBM's Advanced Lithography Facility (ALF) in 1995. This aligner was designed to satisfy the manufacturing requirements for 250 and 180 nm groundrule electronic devices, such as 256 Mbit and 1 Gbit DRAMs, while connected to synchrotron beamlines which use scanning beam systems for x- ray flux delivery. The aligner uses an innovative x-ray image sensor (XRIS) to align the mask by detecting its x-ray actinic image, and uses an off-axis alignment system, similar to the alignment system used in Micrascan-II, to align the wafer. As a result, the same wafer alignment marks can be used by either tool. This facilitates the mix and match between the x-ray aligner and Micrascan-II optical steppers. A stabilized helium environment is maintained from the beryllium window of the beamline to the exposure plane, including the gap between mask and wafer. The aligner can accept x-ray masks that conform to NIST standards, and has a maximum exposure field of 50 mm by 50 mm. The important lithography performance parameters, i.e., overlay, linewidth control and throughput, have been evaluated. The test methodologies and their results are presented in detail. Potential improvements of the system's performance will also be discussed.

Citation Download Citation

Alek C. Chen, Alex L. Flamholz, Azalia A. Krasnoperova, Robert P. Rippstein, Ben R. Vampatella, George A. Gomba, Robert H. Fair, William Chu, V. Dimilia, J. P. Silverman, R. J. Amodeo, Dave A. Heald, P. C. Kochersperger, and Carl Stahlhammer "Evaluation of the Defense Advanced Lithography Program (DALP) x-ray lithography aligner", Proc. SPIE 3048, Emerging Lithographic Technologies, (7 July 1997); https://doi.org/10.1117/12.275803

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available