Paper
7 July 1997 Optical microlithography with nearly nondiffracting beams
Miklos Erdelyi, Zoltan L. Horvath, Zsolt Bor, Gabor Szabo, Joseph R. Cavallaro, Michael C. Smayling, Frank K. Tittel
Author Affiliations +
Abstract
A new concept based on a Fabry-Perot interferometer for the generation of nearly nondiffracting Bessel beams is described experimentally and theoretically, and proposed for potential applications in microlithography such as the fabrication of small isolated patterns. It was demonstrated that the depth of focus can be increased by a factor of about 2, and simultaneously the transverse resolution improved by a factor of 1.6, when using this technique to image contact holes. The theoretical curves show very good agreement with the measured intensity distribution. The properties of simultaneous imaging of two contact holes were also investigated. It was shown experimentally that even in the most critical case (when the first diffraction rings overlap), undesirable interference effects between the adjacent contact holes can be eliminated by means of a phase shifting technique.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Miklos Erdelyi, Zoltan L. Horvath, Zsolt Bor, Gabor Szabo, Joseph R. Cavallaro, Michael C. Smayling, and Frank K. Tittel "Optical microlithography with nearly nondiffracting beams", Proc. SPIE 3051, Optical Microlithography X, (7 July 1997); https://doi.org/10.1117/12.276053
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical lithography

Nondiffracting beams

Bessel beams

Diffraction

Fabry–Perot interferometry

Image resolution

Phase shifting

Back to Top