You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
5 August 1997Automatic aerotriangulation with frame and three-line imagery
In this paper an approach for automatic aerotriangulation (AAT) is presented, which is designed for frame and three-line imagery. We focus on the extraction of conjugate points, because the geometric differences in geometry of frame and three-line imagery can be considered as well-known and are only different modules at the implementation stage. Our approach uses point features and a coarse-to-fine strategy based on image pyramids. To extract conjugate points we employ feature-based matching of image pairs on all pyramid levels. After matching all overlapping pairs of images, manifold conjugate point tuples are generated and checked for geometric consistency individually as well as in their local neighborhood. Subsequently, the exterior orientation parameters for the whole block are calculated on each pyramid level in a robust bundle adjustment together with 3D- coordinates for the conjugate point tuples in an arbitrary reference system. This information serves as initial values on the next lower pyramid level. Control information is not necessary a priori, but can be introduced at any stage of processing. The approach has been tested with various imagery. A few hundred well distributed conjugate points were extracted in all cases. In particular, a large number of many-ray points, which are essential for a stable block geometry was detected. The standard deviation of all image coordinates lies between 0.3 and 0.4 pixels. These results constitute a proof- of-concept and demonstrate the feasibility of the presented approach.
The alert did not successfully save. Please try again later.
Christian Heipke, Wilhelm Mayr, Christian Wiedemann, Heinrich Ebner, "Automatic aerotriangulation with frame and three-line imagery," Proc. SPIE 3072, Integrating Photogrammetric Techniques with Scene Analysis and Machine Vision III, (5 August 1997); https://doi.org/10.1117/12.281063