Paper
26 May 1997 Diode-pumped 2-um solid state lidar transmitter for wind measurements
Author Affiliations +
Proceedings Volume 3104, Lidar Atmospheric Monitoring; (1997) https://doi.org/10.1117/12.275147
Event: Environmental Sensing III, 1997, Munich, Germany
Abstract
Laser remote sensing technique using coherent lidar systems are being widely used for wind measurements. Laser wind measurements use the Doppler shift of backscattered radiation to determine the wind speed. To measure the small Doppler shifts accurately heterodyne detection is used. This technique requires an energetic, low divergence, narrow linewidth laser transmitter to maintain a high degree of coherence. For measurements from ground, air, or space platform, a reliable, all solid-state laser transmitter in the eye-safe region with appreciable energy/pulse is required. This paper reports development and performance of a diode-pumped solid-state amplifiers at 2-micrometer. Q-switched, 400-ns pulses with output energy of 700 mJ at 2-micrometer, representing an optical-to-optical efficiency of 2%, was achieved from five diode-pumped Ho:TM:YLF laser amplifiers at room-temperature.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Upendra N. Singh, Julie A. Williams-Byrd, Norman P. Barnes, Jirong Yu, Mulugeta Petros, George E. Lockard, and Edward A. Modlin "Diode-pumped 2-um solid state lidar transmitter for wind measurements", Proc. SPIE 3104, Lidar Atmospheric Monitoring, (26 May 1997); https://doi.org/10.1117/12.275147
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oscillators

Amplifiers

Optical amplifiers

Wind energy

Semiconductor lasers

Diodes

LIDAR

Back to Top