Paper
14 November 1997 Characterization of sol-gel-prepared Ti02 thin film for O2 sensing
Author Affiliations +
Proceedings Volume 3241, Smart Materials, Structures, and Integrated Systems; (1997) https://doi.org/10.1117/12.293527
Event: Far East and Pacific Rim Symposium on Smart Materials, Structures, and MEMS, 1997, Adelaide, Australia
Abstract
This paper presents the results of our investigation on deposition and characterization of sol-gel prepared TiO2 thin films for oxygen sensing applications. The properties of pure TiO2 thin films are compared with those doped with niobium oxide and 1%pt. These films are characterized using Rutherford backscattering spectroscopy (RBS), x-ray diffraction (XRD) and scanning electron microscopy (SEM) to study their chemical composition, structure and surface morphology respectively. Both kinds of the films are stoichiometric. Pure TiO2 as well as doped films were amorphous as deposited. Pure TiO2 films after annealing to 450 degrees Celsius and above showed the formation of anatase phase, while the doped films still predominantly amorphous, barely showing the onset of crystallinity. Pure films after annealing to 600 degrees Celsius appear to have become granular and porous. Doping with niobium oxide and Pt resulted in modification of film microstructure also. As a result of doping, the gas sensitivity of the films is increased from 8 to 24 and operating temperature decreased from 320 degrees Celsius to 190 degrees Celsius.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Massood Zandi Atashbar, Muralihar K. Ghantasala, and Wojtek Wlodarski "Characterization of sol-gel-prepared Ti02 thin film for O2 sensing", Proc. SPIE 3241, Smart Materials, Structures, and Integrated Systems, (14 November 1997); https://doi.org/10.1117/12.293527
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thin films

Oxygen

Scanning electron microscopy

Annealing

Doping

Niobium

Crystals

Back to Top