Paper
20 April 1998 Toward the real threshold of the megajoule laser components
Anne Fornier, C. Cordillot, D. Bernardino, B. Pinot, Bernard Geenen, Herve Leplan, W. Alexandre
Author Affiliations +
Abstract
Large components typically 620 mm X 440 mm are needed to build up the LMJ (laser megajoule) which belongs to the future generation of the fusion laser. Today, the laboratory laser damage facilities allow to test small samples: generally witnesses with 50 mm in diameter. However, more of the test procedures are manually and small areas are examined. It means that usually just 20 and 50 sites are tested with a small Gaussian beam. Therefore, it is essential to verify if the large components needed for the fusion laser have the threshold above the requirements. It is also important to determine which law exists between the threshold of the witnesses samples and the threshold of the final components. In this paper, these problems are addressed in using the most powerful pulsed Nd:YAG laser in France. With this particular facility it becomes possible to test full scale optics on a few sites with a beam size diameter of 6 cm. Except the test on the real system, these kinds of experiments allow to observe the large beam damage morphologies. A study is at the beginning to try to find the scale law which linked the result obtained on the small witnesses with various methods. It also should lead to a procedure to qualify the full scale optics during the production time.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anne Fornier, C. Cordillot, D. Bernardino, B. Pinot, Bernard Geenen, Herve Leplan, and W. Alexandre "Toward the real threshold of the megajoule laser components", Proc. SPIE 3244, Laser-Induced Damage in Optical Materials: 1997, (20 April 1998); https://doi.org/10.1117/12.307002
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser damage threshold

Laser components

Laser welding

Gaussian beams

Laser induced damage

Nd:YAG lasers

Optical testing

RELATED CONTENT

Laser-induced damage testing of optics for the ALADIN laser
Proceedings of SPIE (November 21 2017)
Laser qualification testing of space optics
Proceedings of SPIE (January 15 2007)
Vacuum laser damage test bench
Proceedings of SPIE (February 07 2006)
Effect of laser beam size on laser-induced damage performance
Proceedings of SPIE (November 22 2011)
Influence of the laser beam size on laser induced damage...
Proceedings of SPIE (January 18 2007)

Back to Top