Paper
27 May 1998 Factors affecting the life of dye laser flash lamps
Alan W. Miller, Peter R. Horsted, Robert J. Chad
Author Affiliations +
Abstract
The life of high power short pulse flashlamps for dye lasers has been examined and a key degradation process identified. Three main effects have been identified and characterized. These are an initial steep drop in optical output followed by a slow decline in output with continuous running and an output recovery after a rest period. Mass spectroscopy has shown that there is a substantial build-up of oxygen in the flashlamp during the first few pulses. The oxygen is believed to be a result of the break-up of the quartz wall. Using this simple process of wall erosion the three effects above have been explained. This has led to a new model to predict the life of short pulse, high power flashlamps where operational lifetime is dominated by wall erosion rather than thermal stress.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alan W. Miller, Peter R. Horsted, and Robert J. Chad "Factors affecting the life of dye laser flash lamps", Proc. SPIE 3265, Solid State Lasers VII, (27 May 1998); https://doi.org/10.1117/12.308677
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxygen

Xenon

Dye lasers

Silicon

Circuit switching

Inductance

Lamps

RELATED CONTENT

A 4 8GHz CMOS active balun using a compensated single...
Proceedings of SPIE (December 21 2007)
Uniform model for series R L and parallel R L...
Proceedings of SPIE (June 09 1999)
Exposure Time: It Can Be Important
Proceedings of SPIE (March 01 1983)
Performance modeling of pulsed short-arc xenon flashlamps
Proceedings of SPIE (January 22 2004)
High Q rf passives on organic substrates using a low...
Proceedings of SPIE (April 19 2002)

Back to Top