Paper
16 April 1998 Finite element modeling of active cabin noise control problems
Author Affiliations +
Proceedings Volume 3321, 1996 Symposium on Smart Materials, Structures, and MEMS; (1998) https://doi.org/10.1117/12.305620
Event: Smart Materials, Structures and MEMS, 1996, Bangalore, India
Abstract
Modeling of piezoelectric smart structures applied in a cabin noise problem is studied. Cubic shaped acoustic cavity with flat plate which covers one side is taken as the problem. Noise source locates outside of the box and the noise propagates into the interior region through the plate structure. Disk shaped piezoelectric actuators are mounted on the plate and the actuators are excited. The actuators will generate a proper response to reduce the pressure fields at a certain region in the cavity. The plate structure is modeled using finite element method which is based on a combination of 3D piezoelectric, flat shell and transition elements. The transition element connects the 3D and flat shell elements. Acoustic cavity is modeled using modal approach which represents the pressure fields in the cavity as a sum of mode shapes of the cavity with unknown coefficients. By using orthogonality of the mode shapes of the cavity, finite element equation for the structure with the influence of acoustic cavity is derived. Once the structure response is found by solving the finite element equation, the pressure fields at the inside of the cavity are recovered directly. Numerical results show the pressure fields at the inside of the box. No activation results are examined at different frequencies to see the feasibility of the proposed modeling approach. When the actuators are activated, the results of pressure fields inside of the cavity show that the cabin noise at a certain zone inside the cavity can be reduced. Future works to improve cabin noise control performance are addressed.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jaehwan Kim, Vasundara V. Varadan, and Bumjin Ko "Finite element modeling of active cabin noise control problems", Proc. SPIE 3321, 1996 Symposium on Smart Materials, Structures, and MEMS, (16 April 1998); https://doi.org/10.1117/12.305620
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Acoustics

Actuators

3D modeling

Finite element methods

Transition metals

Smart structures

Sensors

Back to Top