Ultrasonic cure and temperature monitoring of photoresist during the pre-exposure bake process

Susan L. Morton; F. Levent Degertekin; Butrus T. Khuri-Yakub

doi:10.1117/12.308733

8 June 1998 Ultrasonic cure and temperature monitoring of photoresist during the pre-exposure bake process

Susan L. Morton, F. Levent Degertekin, Butrus T. Khuri-Yakub

Proceedings Volume 3332, Metrology, Inspection, and Process Control for Microlithography XII; (1998) https://doi.org/10.1117/12.308733
Event: 23rd Annual International Symposium on Microlithography, 1998, Santa Clara, CA, United States

Abstract

A system of in situ ultrasonic sensors has been developed that can be used to monitor the photoresist prebake process. A high frequency phase measurement monitors the resist film properties while a lower frequency time of flight measurement monitors the corresponding wafer temperature. The high frequency measurement involves calculating the phase of an ultrasound signal as it is reflected from the silicon/photoresist interface. As the photoresist film changes in thickness and viscoelastic properties, the phase of the reflected signal will change. In this way, it is possible to follow how the photoresist film changes as it bakes; the solvent evaporates from the resist, decreasing the thickness and increasing the density. Results indicate that there is a phase minimum at a repeatable temperature, believed to be the softening or glass transition temperature (T_g). The lower frequency (200 kHz) time of flight measurement employs PZT-5H piezoelectric transducers bonded to a quartz buffer rod. The transducer generates a Lamb wave in the wafer which is then detected at another location by an identical transducer. The time of flight of the Lamb wave through the wafer depends linearly on temperature. Using these two sensors, we can measure the wafer temperature and the photoresist properties during prebake; providing us with the information necessary for in situ process control.

Citation Download Citation

Susan L. Morton, F. Levent Degertekin, and Butrus T. Khuri-Yakub "Ultrasonic cure and temperature monitoring of photoresist during the pre-exposure bake process", Proc. SPIE 3332, Metrology, Inspection, and Process Control for Microlithography XII, (8 June 1998); https://doi.org/10.1117/12.308733

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available