Laser cleaning of metal surfaces

Craig T. Walters; Bernard E. Campbell; Robert J. Hull

doi:10.1117/12.321613

14 September 1998 Laser cleaning of metal surfaces

Craig T. Walters, Bernard E. Campbell, Robert J. Hull

Proceedings Volume 3343, High-Power Laser Ablation; (1998) https://doi.org/10.1117/12.321613
Event: High-Power Laser Ablation, 1998, Santa Fe, NM, United States

Abstract

There is a critical need to replace ozone-depleting substances and hazardous chemicals that, in the past, have been used routinely in aerospace maintenance operations such as precision cleaning of metal surfaces. Lasers now offer the potential for removal of many organic materials from metals without the use of any solvent or aqueous cleaning agents. This paper presents quantitative results of laser-cleaning process-development research with a pulsed Nd:YAG laser and several common metals and organic contaminants. Metal coupons of Stainless Steel 304, Aluminum 5052, and Titanium were contaminated with known amounts of organic oils and greases at contamination levels in the 5 to 200 (mu) g/cm² range. A fiber-optic-delivered 1064-nm pulsed laser beam (20-Hz repetition rate) was scanned over the coupons with different overlap and pulse fluence conditions. Measurements of mass loss revealed that all levels of initial contamination could be removed to final cleanliness levels less than 3 (mu) g/cm², at which point the mass loss measurements became uncertain. Pulse fluence thresholds for initial cleaning effects and practical cleaning rates for several metal and contaminant combinations are reported. From the totality of the results, an overall picture of the contaminant removal mechanism is emerging. For semi-transparent films, it is conjectured that a thermo-mechanical effect occurs wherein the laser energy is absorbed predominantly in the metal substrate which expands on the nanosecond time scale. This rapid expansion, in combination with some material evaporation at the film/metal interface, is believed to eject the contaminant film directly into aerosol droplets/particles which can be swept away and collected for recycle or cost- effective disposal in a compact form. Evidence for this mechanism will be presented.

Citation Download Citation

Craig T. Walters, Bernard E. Campbell, and Robert J. Hull "Laser cleaning of metal surfaces", Proc. SPIE 3343, High-Power Laser Ablation, (14 September 1998); https://doi.org/10.1117/12.321613

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available