Paper
4 September 1998 Neutralization of potential land mine hazards by abrasive waterjet use
David A. Summers, Robert D. Fossey, S. J. Thompson
Author Affiliations +
Abstract
A method of neutralizing landmines in which the integrity of the surrounding terrain is retained is herein described. High pressure waterjets which can be used to detect the presence of landmines can then be used to remove the soil and other cover in a plane immediately adjacent to and around the mine so that the side of the mine can be visually inspected through a remote television camera. At that time the flow of water is channeled through a line in which small particles of sand are added to the waterjet which is at a pressure of between 3,000 and 10,000 psi depending on the device which is used. Jet flow rates are on the order of 5 gpm depending on the nozzle configuration used. By bringing this abrasive stream in along a lateral plane through the mine it is possible to intersect, and neutralize, the fusing systems most likely to be used to initiate the charge, in a single pass. At higher flow rates, as the cut is made the jet will generate significant turbulence in the mine body, sufficient to remove a considerable quantity of the explosive which is resident within the mine at the same time as the mine is being dissected. The precision of cut achievable is shown by the longitudinal cutting into two parts of live detonators, as well as representative mine bodies.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David A. Summers, Robert D. Fossey, and S. J. Thompson "Neutralization of potential land mine hazards by abrasive waterjet use", Proc. SPIE 3392, Detection and Remediation Technologies for Mines and Minelike Targets III, (4 September 1998); https://doi.org/10.1117/12.324251
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Land mines

Mining

Abrasives

Explosives

Particles

Metals

Fourier transforms

RELATED CONTENT

Remote laser cutting of CFRP influence of the edge...
Proceedings of SPIE (February 20 2014)
Thermal neutron analysis technology
Proceedings of SPIE (February 06 1997)
High Speed Photography What Role Does It Play In Mining?
Proceedings of SPIE (September 01 1987)
Evaluation of PELAN as a landmine confirmation sensor
Proceedings of SPIE (May 18 2006)
Synthetic magnetic soils for landmine detector testing
Proceedings of SPIE (September 11 2003)

Back to Top