Paper
31 March 1998 Making accurate three-dimensional measurements through a standard borescope
Author Affiliations +
Abstract
A new system for making dimensional measurements through a rigid borescope is described. Unlike commercially available systems, the random error in the measurement is proportional to the range to the object, rather than to the square of the range. The system requires only the addition of a video cursor generator, a computer, software, and a precision translator to any standard, substantially side-looking borescope. the system is implemented so that the user can effectively interpolate between camera pixels along the axis to which the measurement is most sensitive to pointing errors. Under ideal conditions, the relative positions of object points can be located in three dimensions to within 0.1 percent of the range, and the precision to which the 3D distance between points can be determined is several times better than that. Measurements of distances under field realistic conditions are demonstrated to have a precision of 0.4 percent of the range. In all cases, the systematic error in the measurement is demonstrated to be consistent with the level of precision.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David F. Schaack "Making accurate three-dimensional measurements through a standard borescope", Proc. SPIE 3397, Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware II, (31 March 1998); https://doi.org/10.1117/12.305062
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Video

Calibration

Imaging systems

Distance measurement

Distortion

3D metrology

Back to Top