Bridge stay cable condition assessment using vibration measurement techniques

Habib Tabatabai; Armin B. Mehrabi; Wen-huei Phillip Yen

doi:10.1117/12.300091

31 March 1998 Bridge stay cable condition assessment using vibration measurement techniques

Habib Tabatabai, Armin B. Mehrabi, Wen-huei Phillip Yen

Proceedings Volume 3400, Structural Materials Technology III: An NDT Conference; (1998) https://doi.org/10.1117/12.300091
Event: Non-Destructive Evaluation Techniques for Aging Infrastructure and Manufacturing, 1998, San Antonio, TX, United States

Abstract

In this paper, results of a research project sponsored by the Federal Highway Administration (FHWA) on a non-destructive method for measurement of stay cable forces in cable-stayed bridges are presented. This project included development and verification of specific analytical and experimental procedures for measurement of stay cable forces. In one set of procedures, a single laser vibrometer is used to measure low- level cable vibrations due to ambient (wind and traffic) excitation. The laser device allows rapid measurement of cable vibrations at distances of up to several hundred feet. Procedures are also developed for utilization of accelerometers attached to cables. Contact sensors are more appropriate when long-term remote monitoring is desired. Measured natural frequencies of vibration are related to cable tension through a mathematical formulation developed during the course of this study. This formulation includes the effects of cable sag-extensibility, bending stiffness, various boundary conditions, intermediate springs or dampers, etc. This method can also be used during construction in lieu of the 'lift off' method. The accuracy and effectiveness of this methodology was tested in the laboratory on a scaled model of a cable, and on two cable-stayed bridges. This ability to rapidly measure stay cable forces provides an opportunity for global condition assessment of these major structures.

Citation Download Citation

Habib Tabatabai, Armin B. Mehrabi, and Wen-huei Phillip Yen "Bridge stay cable condition assessment using vibration measurement techniques", Proc. SPIE 3400, Structural Materials Technology III: An NDT Conference, (31 March 1998); https://doi.org/10.1117/12.300091

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available