Paper
7 April 1999 Effects of layer thickness and number of interfaces on the damage threshold of ultraviolet sol-gel mirrors
Hazel A. McInnes, James E. Andrew, Nicholas J. Bazin, A. J. Morris, K. J. Porter
Author Affiliations +
Abstract
Previous results1 have shown that single layers of nitric or acetic acid stabilised zirconia and silica sol-gels have very high laser induced damage thresholds (LIDT). A significant decrease in the LIDT has been found when the materials are combined in layer pairs to form ultra violet mirrors. Investigations of possible causes of the lower LIDT will be reported. The effect of the coherent intensity enhancement at interfaces was tested by measuring the LIDT at 3 55nm on mirrors of different wavelength tuning. Three nine pair mirrors were used. These components are for use at 355nm and the first high reflector was specified at this wavelength. The other two components were made with high reflectivity at 300nm and 400nm and lower reflectivity at 355nm to check how the intensity ofthe internally reflected light would affect the LIDT.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hazel A. McInnes, James E. Andrew, Nicholas J. Bazin, A. J. Morris, and K. J. Porter "Effects of layer thickness and number of interfaces on the damage threshold of ultraviolet sol-gel mirrors", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); https://doi.org/10.1117/12.344378
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Zirconium dioxide

Reflectivity

Silica

Sol-gels

Multilayers

Laser damage threshold

Back to Top