Translator Disclaimer
3 June 1999 Silicon microphysiometer for high-throughput drug screening
Author Affiliations +
Proceedings Volume 3606, Micro- and Nanofabricated Structures and Devices for Biomedical Environmental Applications II; (1999)
Event: BiOS '99 International Biomedical Optics Symposium, 1999, San Jose, CA, United States
We report on a micromachined silicon chip that is capable of providing a high-throughput functional assay based on calorimetry. A prototype twin microcalorimeter based on the Seebeck effect has been fabricated by IC technology and micromachined postprocessing techniques. A biocompatible liquid rubber membrane supports two identical 0.5 X 2 cm2 measurement chambers, situated at the cold and hot junction of a 666-junction aluminum/p+-polysilicon thermopile. The chambers can house up to 106 eukaryotic cells cultured to confluence. The advantage of the device over microcalorimeters on the market, is the integration of the measurement channels on chip, rendering microvolume reaction vessels, ranging from 10 to 600 (mu) l, in the closest possible contact with the thermopile sensor (no springs are needed). Power and temperature sensitivity of the sensor are 23 V/W and 130 mV/K, respectively. The small thermal inertia of the microchannels results in the short response time of 70 s, when filled with 50 (mu) l of water. Biological experiments were done with cultured kidney cells of Xenopus laevis (A6). The thermal equilibration time of the device is 45 min. Stimulation of transport mechanisms by reducing bath osmolality by 50% increased metabolism by 20%. Our results show that it is feasible to apply this large-area, small- volume whole-cell biosensor for drug discovery, where the binding assays that are commonly used to provide high- throughput need to be complemented with a functional assay. Solutions are brought onto the sensor by a simple pipette, making the use of an industrial microtiterplate dispenser feasible on a nx96-array of the microcalorimeter biosensor. Such an array of biosensors has been designed based on a new set of requirements as set forth by people in the field as this project moved on. The results obtained from the prototype large-area sensor were used to obtain an accurate model of the calorimeter, checked for by the simulation software ANSYS. At present, the sensor chip has been designed. Future publication(s) will deal with this part of the work.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katarina Verhaegen, Christiaan Baert, Bob Puers, Willy Sansen, Jeannine Simaels, Veerle Van Driessche, Lou Hermans, and Robert P. Mertens "Silicon microphysiometer for high-throughput drug screening", Proc. SPIE 3606, Micro- and Nanofabricated Structures and Devices for Biomedical Environmental Applications II, (3 June 1999);

Back to Top