Wafer printability simulation accuracy based on UV optical inspection images of reticle defects

Donald W. Pettibone; Mohan Ananth; Maciej W. Rudzinski; Sterling G. Watson; Larry S. Zurbrick; Hua-Yu Liu; Linard Karklin

doi:10.1117/12.350857

14 June 1999 Wafer printability simulation accuracy based on UV optical inspection images of reticle defects

Donald W. Pettibone, Mohan Ananth, Maciej W. Rudzinski, Sterling G. Watson, Larry S. Zurbrick, Hua-Yu Liu, Linard Karklin

Author Affiliations +

Proceedings Volume 3677, Metrology, Inspection, and Process Control for Microlithography XIII; (1999) https://doi.org/10.1117/12.350857
Event: Microlithography '99, 1999, Santa Clara, CA, United States

Abstract

As semiconductor processes have moved towards lower k₁ and mask inspection equipment has moved into the UV range, more subtle reticle defects have been found to cause manufacturing problems. Lower k₁ and new lithography processes and reticle technologies, such as OPC and PSM, have made it difficult to determine the significant and these defects. This paper reports on the development of a simulation tool that will improve the yield and productivity of photomask manufacturers and wafer manufacturers by improving reticle defect assessment. This study demonstrates the accuracy of simulation software that predicts resist patterns based on sophisticated modeling software that uses optical images obtained from a state-of-the-art UV optical inspection system. A DUV 4X reduction stepper was used to print a reticle with programmed defects across an exposure/focus matrix, with the minimum feature size being 200 nm. Quantitative comparisons between predicted and measured wafer CDs were made. In summary, it was found that the simulation software based solely on aerial images predicted absolute CDs with limited accuracy, but differential CDs with limited accuracy, but differential CDs, obtained by utilizing both the reference and defect images, were predicted accurately. Comparison of simulations using both reticle SEM images and optical reticle inspection images showed good agreement, demonstrating the accuracy and high resolution of the optical reticle inspection images. Application of differential aerial images to a simple test case showed that it was possible to identify and therefore eliminate a significant number of defects that did not print, thereby improving defect assessment.

Citation Download Citation

Donald W. Pettibone, Mohan Ananth, Maciej W. Rudzinski, Sterling G. Watson, Larry S. Zurbrick, Hua-Yu Liu, and Linard Karklin "Wafer printability simulation accuracy based on UV optical inspection images of reticle defects", Proc. SPIE 3677, Metrology, Inspection, and Process Control for Microlithography XIII, (14 June 1999); https://doi.org/10.1117/12.350857

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available