Paper
10 March 1999 Design of a pigtailed tunable filter for optical fiber transmissions at 1.3 to 1.55 μm
Jean-Philippe Gouy, A. Tixier, Gen Hashiguchi, Hiroshi Toshiyoshi, Hiroyuki Fujita
Author Affiliations +
Proceedings Volume 3680, Design, Test, and Microfabrication of MEMS and MOEMS; (1999) https://doi.org/10.1117/12.341204
Event: Design, Test, and Microfabrication of MEMS/MOEMS, 1999, Paris, France
Abstract
A micromechanically tunable Fabry Perot filter where the optical wavelength is tuned by moving a slider in the cavity is designed: the Fabry Perot filter is an air cavity in which the optical path ca be increased by inserting a transparent slider; the tuning effect depends on the thickness of the slider. Using a methodology based on a parametric investigation of the technological parameters, the design of a filter is proposed: a lower sensitivity to the position of the slider in the cavity is expected to realize the device using silicon micromachining.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean-Philippe Gouy, A. Tixier, Gen Hashiguchi, Hiroshi Toshiyoshi, and Hiroyuki Fujita "Design of a pigtailed tunable filter for optical fiber transmissions at 1.3 to 1.55 μm", Proc. SPIE 3680, Design, Test, and Microfabrication of MEMS and MOEMS, (10 March 1999); https://doi.org/10.1117/12.341204
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electronic filtering

Mirrors

Tunable filters

Optical filters

Wavelength division multiplexing

Silicon

Wave propagation

RELATED CONTENT

LWIR/MWIR adaptive focal plane array
Proceedings of SPIE (December 06 2004)
Infrared micromachined Fabry-Perot interferometer
Proceedings of SPIE (September 22 1997)

Back to Top