You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
1 September 1999High pressure and temperature sensing for the oil industry using fiber Bragg gratings written onto side hole single mode fiber
We describe novel Bragg grating sensors based single mode fiber made with side air holes. Measurements made at 12 kpsi and 100 C produced enhanced sensitivity and reduced thermal dependence compared to normal fiber Bragg gratings.
Robert J. Schroeder
"High pressure and temperature sensing for the oil industry using fiber Bragg gratings written onto side hole single mode fiber", Proc. SPIE 3746, 13th International Conference on Optical Fiber Sensors, 374632 (1 September 1999); https://doi.org/10.1117/12.2302100
The alert did not successfully save. Please try again later.
Robert J. Schroeder, "High pressure and temperature sensing for the oil industry using fiber Bragg gratings written onto side hole single mode fiber," Proc. SPIE 3746, 13th International Conference on Optical Fiber Sensors, 374632 (1 September 1999); https://doi.org/10.1117/12.2302100