Paper
25 October 1999 Compact solid polarization phase-shifting Mach-Zehnder interferometer
Patrick J. Reardon, Jeff L. Howard, Greg Lawson, Alexander McPherson, Mark E. Wells
Author Affiliations +
Abstract
A small rugged interferometer was required for measuring the depletion zones generated in a protein crystal growth experiment. The exploration for an optimum solution yielded an instrument that uses solid optical design techniques, where air is removed from the optical path and replaced with 'solid air' or glass. The interferometer is a Mach-Zehnder configuration with the reference and test arms separated as orthogonal polarization states with a polarization beam splitting cube (PBSC), then recombined by another PBSC, maintaining the orthogonality of the reference and test beam polarizations. An off-the-shelf liquid crystal variable phase plate was sufficient to produce the necessary 2(pi) phase shift. The device was built and tested and shoed excellent performance. The spatial resolution of the interferometer is limited only by the 0.011mm pixels at the 5 by 5 mm detector and the imager is operating at telecentric 1:1 conjugates. Phase resolution, using the Hariharan 5-step algorithm, is measured to be better than (lambda) /50. In this paper, calibration test results are presented and future upgrades are outlined.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick J. Reardon, Jeff L. Howard, Greg Lawson, Alexander McPherson, and Mark E. Wells "Compact solid polarization phase-shifting Mach-Zehnder interferometer", Proc. SPIE 3754, Polarization: Measurement, Analysis, and Remote Sensing II, (25 October 1999); https://doi.org/10.1117/12.366328
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Solids

Bragg cells

Interferometers

Sensors

Mach-Zehnder interferometers

Imaging systems

Back to Top