Translator Disclaimer
9 September 1999 Holographic modal analysis for the investigation of vibro-acoustic systems
Author Affiliations +
Proceedings Volume 3823, Laser Metrology and Inspection; (1999)
Event: Industrial Lasers and Inspection (EUROPTO Series), 1999, Munich, Germany
In order to optimize the vibro-acoustic behavior of panel-like structures in a more systematic way, accurate structural models are needed. However, at the frequencies of relevance to the vibro-acoustic problem, the mode shapes are very complex, requiring a high spatial resolution in the measurement procedure. The large number of required transducers and their mass loading effects limit the applicability of accelerometer testing. In recent years, optical measurement methods have been proposed. Direct electronic (ESPI) imaging, using strobed laser illumination, or more recently, pulsed laser illumination, have lately created the possibility to bring the holographic testing approach to the level of industrial applicability for modal analysis procedures. Therefore an automated ESPI system has been developed for the measurement of frequency response functions using stepped sine testing. A conventional numerical modal analysis procedure is used to obtain the modal information. The present paper discusses the various critical elements of a holographic ESPI modal testing system. Next to the optical parts, the integration with the modal analysis procedures, including the integration of geometry and response measurement, are discussed. The paper furthermore discusses test results obtained on a car panel in a vibro-acoustic setup. The results show, that the quality of the frequency response functions is very good, when compared with acceleration sensor measurements. The measurement data are used to predict interior noise.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carsten Haberstok, Raymond Freymann, Hans Steinbichler, Herman Van der Auweraer, and Steve Vanlanduit "Holographic modal analysis for the investigation of vibro-acoustic systems", Proc. SPIE 3823, Laser Metrology and Inspection, (9 September 1999);

Back to Top