Paper
1 September 1999 Impact of active dimension on junction leakages of a Ti-salicide process integrated with shallow-trench isolation
Soh Yun Siah, Eng-Hua Lim, Ming-Jr Shiu, Kong Hean Lee, Jia Zhen Zheng
Author Affiliations +
Abstract
We observed that the active line dimension bounded by shallow trench isolations (STI) affects the junction leakages significantly. The diodes with high STI peripheral to area ratio were found to be sensitive line dimension is shrinked to 1 order. Cross-sectional transmission electron microscopy on the silicided p+ active lines of different widths showed a bowing-up of the silicide film for narrower lines. The unique silicide film profile is caused by more Si consumption along the center of the narrow lines which in turn draws the silicide film closer to the junction. Junction delineation using Wright etch technique revealed a similar bowed junction profile near the STI edge implying an effectively shallower junction. We believe that the uneven Si consumption is aggravated by the overlapping stress from the trench sidewalls which forms a highly stressed region especially in the narrow active lines. Relieving some sidewall stress by allowing some STI trench oxide recess actually helps to modulate the Si consumption from the center to the edge of the active lines which result in more even silicidation and lower junction leakage.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Soh Yun Siah, Eng-Hua Lim, Ming-Jr Shiu, Kong Hean Lee, and Jia Zhen Zheng "Impact of active dimension on junction leakages of a Ti-salicide process integrated with shallow-trench isolation", Proc. SPIE 3881, Microelectronic Device Technology III, (1 September 1999); https://doi.org/10.1117/12.360566
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Oxides

Semiconducting wafers

Diodes

Resistance

Etching

Titanium

RELATED CONTENT

Titanium silicide etching in sub-half-micron device technology
Proceedings of SPIE (September 04 1998)
Application of RTA to a 0.8-um BiCMOS process
Proceedings of SPIE (February 15 1994)
High contact resistance heavily doped silicided p+ junctions
Proceedings of SPIE (September 12 1996)
Novel through-die connections for MEMS applications
Proceedings of SPIE (January 15 2003)

Back to Top