Paper
1 October 1999 Fabrication of thin film metallic glass and its application to microactuators
Seiichi Hata, Kaiji Sato, Akira Shimokohbe
Author Affiliations +
Proceedings Volume 3892, Device and Process Technologies for MEMS and Microelectronics; (1999) https://doi.org/10.1117/12.364504
Event: Asia Pacific Symposium on Microelectronics and MEMS, 1999, Gold Coast, Australia
Abstract
Metallic glasses are kinds of amorphous alloys. They are free from defects resulting from crystalline structures. Metallic glasses soften in a certain temperature range called the supercooled liquid region, which makes metallic glasses easily be formed into a 3D shape. This paper first describes a fabrication method for a thin film metallic glass (TFMG) using RF magnetron sputtering. Secondly A micro beam of TFMG is introduced. Although the fabricated micro beams bent due to the internal stress caused by stress was related by annealing the beams in the supercooled liquid region, and straight beams were fabricated. Secondly, curved micro beams of TFMG were micro formed by heating the straight beams again into the supercooled liquid state. Finally, a new type electrostatic microactuator of a conical spring shape was made of TFMG. CSLA was capable of stepwise motion vertical to the substrate. The 10 micrometers step height and 30 micrometers total height were realized.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seiichi Hata, Kaiji Sato, and Akira Shimokohbe "Fabrication of thin film metallic glass and its application to microactuators", Proc. SPIE 3892, Device and Process Technologies for MEMS and Microelectronics, (1 October 1999); https://doi.org/10.1117/12.364504
Lens.org Logo
CITATIONS
Cited by 30 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Glasses

Electrodes

Thin films

Sputter deposition

Silicon

Annealing

RELATED CONTENT


Back to Top